Warrior Assault Systems DCS Releasable Plate Carrier

The DCS releasable system is a lightweight armor carrier, which accepts both soft and hard armor solutions in front, rear and side integrated pockets. The carrier is covered all round with multiple rows of 1 inch matched camo MOLLE webbing which allows the attachment of a large selection of pouches in multiple mission specific set ups.

2 side cummerbunds allow ambidextrous opening and closure, via Mil Spec Velcro sewn on the lower front of the carrier and sandwiched under a front panel. The front panel has 3 vertical MOLLE rows and 6 horizontal MOLLE loops, which allow direct attachment of immediately accessible items such as magazine pouches. Thumb loops in 1 inch webbing greatly expedite the upward movement of the front panel to allow either cummerbund to be opened.

The internal walls of the carrier have a 3/8 inch 3D Spacer mesh lining that allows heat from the body to evaporate, this coupled with its ability to allow air flow to pass through the mesh, results in an excellent cooling effect. The 3D Spacer mesh has positive compression features that greatly enhances the operator’s comfort levels. The shoulder sections of the carrier are comprised of double layered 2 inch Mil Spec Camo webbing and are covered with removable padded sleeves which help to spread the weight of the carriers load on the operators shoulders, the sleeves can also be opened to allow communication cables and hydration tubes to be routed through.
The rear of the carrier has a 2 inch matched camo reinforced Man Down drag handle, for extraction of casualties.

The carrier is fully releasable, should the user need to rapidly remove the carrier in an emergency situation, for example if the user falls into water, or if a medic needs to treat a serious trauma injury. The carrier incorporates an internal cable system, featuring an ambidextrous release pull. The release pull is securely located in the shoulder and allows a smooth, rapid separation of the front, back and sides of the carrier into individual components. The carrier is fully adjustable for size on the shoulder and girth.

All Threads are Type 69 Nylon Bonded construction, which are resistant to mildew, the effects of UV light and degradation form water, heat and cold.

Product Features

• Integrated quick release mechanism.
• Holds Soft and Hard Armor.
• 3D Spacer Mesh lining.
• 1 Inch Matched Camo Mil Spec webbing.
• 2 Inch Matched Camo Mil Spec webbing.
• Padded Shoulders.
• Light weight.
• Fully adjustable.
• One Size Fits Most
• Weight: 3.23 lbs.

The Los Angeles Police Department (LAPD) recently approved the DCS Plate Carrier and is on their approved gear list. Available/Approved for individual officer purchase.

National Tactical Officers Association (NTOA) Member Tested and Approved 2014

The DCS can be be worn in tandem with the Warrior Frag Belt (sold separately).

500D Cordura Performance Specifications

• Weight: 7.1 Ounces per Square Yard
• Tensile Strength: Warp 453 lbs / Fill 348 lbs
• Tears Strength: Warp 14.1 + lbs / Fill 14.1 + lbs
• Abrasion: Wear Cycles 1955
• Water Repellency: 100%

Webbing

• Genuine US Mil Spec Webbing
• 25mm (1 Inch) Breaking Strain: 1200 lbs
• 38mm (1.5 Inch) Breaking Strain: 1800 lbs
• 50mm (2 Inch) Breaking Strain: 2200 lbs
• MultiCam Products now available with official MultiCam approved Murdock webbing.

Infra-Red Properties

• All our Fabrics, Webbing, Plastic Hardware and Threads are treated at source to deliver the lowest I.R. Signature possible.

Hard / Soft Armor

• This product is capable of holding Hard & Soft armor. Contact us for more details